Using RDS Radio, If Equipped
- Adjust all tire pressures to the recommended kPa/psi.
- Turn the ignition to ACC or ON, with the engine OFF.
- Turn the radio OFF.
- Press and hold the DISP button until SETTINGS is displayed.
- Press the SEEK up or down arrows until TIRE MON is displayed.
- Press the PREV or NEXT button to enter the sub-menu. RESET will be displayed.
- Press the DISP button, A chime will sound and DONE will be displayed.
- Scroll until EXIT is displayed.
- Press the DISP button to exit the TPM reset mode. A chime will sound to verify exit.
- Use the scan tool in order to clear the TPM DTC.