TPMS Reminder Reset - Procedure 19
NOTE:
After resetting, the tire pressure monitoring (TPM) system requires 60 minutes or more of driving at a speed of 30 km/h (19 mph) or above to complete the calibration process to have full capability for detecting a tire pressure condition.
- Adjust all tire pressures to the recommended kPa/psi.
- Turn ignition ON with engine OFF.
- Press and hold the tire pressure warning reset switch until the tire pressure warning indicator blinks 3 times at one second intervals.
- If the tire pressure warning indicator does not blink, repeat the procedure starting at step 2.
- Drive the vehicle for 60 minutes or more at a speed of 30 km/h (19 mph).
- Verify the system has initialized. Turn ignition ON with engine OFF and observe the tire pressure warning indicator.
- System Initialized: light on for 3 seconds.
- System not initialized: light on for 4 seconds.