LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1980 >> Suburban C1500, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Linkage >> All Models >> Relay Rod Removal

Relay Rod Removal

  1. Raise vehicle on hoist. Remove inner ends of tie rods from relay rod. Remove nuts from pitman arm and idler arm ball studs at relay rod. Remove relay rod from pitman and idler arms by tapping on relay rod ball stud bosses with a light hammer while using a heavy hammer as backing. Remove relay rod.
  2. To install, reverse removal procedure and note following: Check ball studs and nuts for clean and smooth threads. Check stud seals and replace if necessary. Torque nuts and install new cotter pins.
scientia non olet · About LEMON Manuals