Manual Bleeding
Fill clutch master cylinder with clean brake fluid. Pump clutch pedal four or five times, and hold pedal at bottom of last stroke. Open bleeder screw on slave cylinder 1/2 turn until fluid and air stop flowing from hose. Close bleeder, then release pedal. Repeat procedure until all air is expelled from system.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. |
|---|---|
| Clutch Cover-to-Flywheel Bolts | 35 |
| Clutch Housing-to-Engine Block Bolts | 30 |
| Transmission-to-Clutch Housing | 55 |