Windshield Washer Fluid Level Sensor: Removal
WARNING: This page is about a different car, the 2023 Ford Mustang Mach-E. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Siphon the windshield washer fluid.Use the General Equipment: Fluid Suction Gun
- Remove the LH fender splash shield. Refer to: Fender Splash Shield .
- Disconnect the windshield washer fluid level sensor electrical connector.
-
NOTE: Be prepared to collect escaping fluid.
Remove the windshield washer fluid level sensor.Use the General Equipment: Fluid Container