Liftgate Latch Manual Release
WARNING: This page is about a different car, the 2023 Ford Mustang Mach-E. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING
46404B6
Special Tool(s) / General Equipment
| Flat-Bladed Screwdriver |
|---|
| Interior Trim Remover |
Activation
- Remove the liftgate latch access cover from the center of the liftgate trim panel.Use the General Equipment: Interior Trim Remover
- Insert a flat-bladed screwdriver through the access cover opening and depress the cinch release button.Use the General Equipment: Flat-Bladed Screwdriver
- Insert a 3.5 mm wide flat-bladed screwdriver through the access cover opening 10 mm deep into the RH side of the slot.Use the General Equipment: Flat-Bladed Screwdriver
- Slide the 3.5 mm wide flat-bladed screwdriver through the access cover opening 5 mm to the LH side of the slot. Releasing the liftgate latch and opening the liftgate.Use the General Equipment: Flat-Bladed Screwdriver