Section 1459 (Driveshaft): Specifications
WARNING: This page is about a different car, the 2024 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Front Driveshaft
| Item | Specification |
|---|---|
| Front driveshaft runout | 0.76 mm (0.029 in) |
| Front driveshaft CV-joint maximum operating angle | 5.4deg. Max |
Rear Driveshaft
| Item | Specification |
|---|---|
| Maximum allowable driveshaft runout FOOTNOTE (a) | 0.50 mm (0.020 in) |
| Maximum allowable driveshaft runout FOOTNOTE (b) | 0.60 mm (0.023 in) |
| Maximum allowable driveshaft runout FOOTNOTE (c) | 0.65 mm (0.025 in) |
| U-joint operating angle range | 0deg.- 4deg. |
| U-joint maximum operating angle | 4deg. Max |
| Rear driveshaft CV-joint maximum operating angle | 6.5deg. Max |
FOOTNOTE (a) 122 inch wheel base 4x2 only
FOOTNOTE (b) 145 inch wheelbase 4x4, with 3.0L; 145 inch wheelbase 4x4, with 3.5L w Max Trailer Tow Option; 145 inch wheelbase 4x4, with 5.0L with 9.75 axle; 145 inch wheelbase 4x4, with 2.7L with 8.8 axle.
FOOTNOTE (c) All vehicles not specified in notes a or b