LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> F-150 Lightning Pro >> Repair and Diagnosis >> External Pages >> Different car >> Section 1251 (Cruise Control - Vehicles With: Adaptive Cruise Control) >> General Procedures >> Cruise Control Radar Alignment >> Adjustment >> Horizontal Alignment

Horizontal Alignment

WARNING: This page is about a different car, the 2023 Ford F-150 Lightning and 2023 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The horizontal alignment for the CCM (cruise control module) is a software calibration check that is performed by the scan tool to insure the CCM (cruise control module) radar is pointed straight. No manual adjustment is needed for this procedure. The scan tool calibrates the CCM (cruise control module) through the CCM (cruise control module) procedure in programmable parameters. The Alignment Offset specification is +/- 3.0 degrees of offset.
  1. Start the engine.
    NOTE: The vehicle's engine must be running during the horizontal alignment procedure. Failure to leave the engine running throughout the entire procedure results in the cancellation of the alignment procedure and the system remains non-functional.
  2. Follow the scan tool on-screen instructions to carry-out the CCM calibration procedure.
scientia non olet · About LEMON Manuals