LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 1076 (Instrument Panel And Console) >> Removal And Installation >> Instrument Panel >> Installation

Instrument Panel: Installation

WARNING: This page is about a different car, the 2022 Ford Police Interceptor Utility and 2022 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 3.3L Duratec-V6 - Hybrid (BP) . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 3.3L Duratec-V6 . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 3.0L EcoBoost . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 2.3L EcoBoost .
  3. NOTE: Anytime the parking brake switch electrical connector has been disconnected, the EPB system is deactivated and a DTC is stored in the EPB module. Perform the following step to restore the EPB system and clear the EPB module DTC.

    Apply and release the parking brake twice within 5 seconds, pausing with the switch in the NEUTRAL position for approximately one-half second between each apply and release. Using a diagnostic scan tool, clear the EPB module DTC.

  4. Repower the SRS. Refer to: Supplemental Restraint System (SRS) Repowering .
scientia non olet · About LEMON Manuals