LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> Body & Frame >> Seats >> Front Seats >> Removal And Installation >> Driver Front Seat Module (DSM) >> Installation

Driver Front Seat Module (DSM): Installation

  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Using a diagnostic scan tool, complete the PMI process for the DSM following the on-screen instructions.

  3. NOTE: This step is only necessary when installing a new DSM (driver front seat module).

    Operate the seat in all directions through the full range of travel to set soft stops and avoid a premature stopping point occurrence after the vehicle is returned to the customer.

scientia non olet · About LEMON Manuals