LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape Plug-In Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 1094 (Engine Cooling - 3.0L ECOBOOST) >> Removal And Installation >> Cooling Module >> Installation

Cooling Module: Installation

WARNING: This page is about a different car, the 2022 Ford Police Interceptor Utility and 2022 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install new condenser fitting O-ring seals. Refer to: Specifications .

  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling And Bleeding .
scientia non olet · About LEMON Manuals