Steering Wheel Multifunction Switch: Removal
WARNING: This page is about a different car, the 2022 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the driver airbag. Refer to: Driver Airbag .
- On both sides. Disconnect the steering wheel multifunction switch electrical connector.
- Remove the steering wheel bezel.
-
NOTE: Right hand (RH) switch shown in illustration, left hand (LH) switch similar.
Remove the retainers and the steering wheel multifunction switch.