Front Stabilizer Bar: Installation
WARNING: This page is about a different car, the 2022 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse the removal procedure.
-
NOTE: The steering column floor seal mounting surface must be cleaned using solvent before reinstallation.
Clean and inspect the steering column floor seal mounting surface before reinstallation.
Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B
-
NOTE: Make sure that the floor seal lip is fully wrapped around the carrier on the steering gear.
Install the new steering column floor seal.
- Check and if necessary adjust the front toe. Refer to: Front Toe Adjustment .