Steering Wheel: Removal

WARNING: This page is about a different car, the 2022 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Remove the driver airbag. Refer to: Driver Airbag .
Remove the steering wheel.
1. Remove and discard the steering wheel bolt.
  Torque: 35 lb.ft (48 Nm)
2. Disconnect the steering wheel electrical connector.
Courtesy of FORD MOTOR COMPANY
NOTE: Make sure that the clockspring rotor does not rotate.

Tape the clockspring rotor to the outer housing to keep it from rotating. Use the General Equipment: Adhesive Tape

Courtesy of FORD MOTOR COMPANY