LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Edge ST-Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 1045 (Anti-Lock Brake System (Abs) And Stability Control) >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Pinpoint Tests >> Pinpoint Test H: Brake System Fill Not Complete

Pinpoint Test H: Brake System Fill Not Complete

WARNING: This page is about a different car, the 2023 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    REFER to: Anti-Lock Brake System (ABS) and Stability Control - System Operation and Component Description .

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    ABS C1020:00 Brake System Fill Not Complete: No Sub Type Information This DTC is pre-set in a new ABS module and can only be cleared when the brake system has been successfully bled.

    Possible Sources 

    • Brake system has not been bled

  2. H1 CHECK THE ABS (ANTI-LOCK BRAKE SYSTEM) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition ON.

    • Using a diagnostic scan tool, carry out the ABS module self-test.

    Is DTC C1020:00 present? 

    Yes  CARRY OUT the brake system bleed procedure. REFER to: Brake System Pressure Bleeding .
    No  The system is operating correctly at this time.
scientia non olet · About LEMON Manuals