LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> E-Transit Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Lane Keeping System >> Removal And Installation >> Image Processing Module A (IPMA) >> Installation

Image Processing Module A (IPMA): Installation

  1. NOTE: Make sure that the surface is clean and free of foreign material.

    To install, reverse the removal procedure.

  2. NOTE: This step is only necessary when installing a new component.

    • If a new IPMA has been installed, using a diagnostic scan tool, complete the PMI process for the IPMA following the on-screen instructions.

    • If a new IPMA has been installed, carry out the camera alignment using a scan tool.

scientia non olet · About LEMON Manuals