LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Edge ST-Line >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls - 2.7L ECOBOOST (238KW/324PS)) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Installation

Camshaft Position (CMP) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE: Before installation, lubricate the CMP sensor O-ring seal with clean engine oil.
  1. To install, reverse the removal procedure.
  2. Lubricate the CMP with clean engine oil.
GFD644750Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals