LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Edge ST-Line >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Electronic Power Assist Steering Guided Routine Testing >> Pinpoint Tests >> Pinpoint Tests BD: PSCM DTC U3001 Control Module Improper Shutdown Performance >> Pinpoint Test Purpose

Pinpoint Test Purpose

To verify PSCM DTC U3001 is present and investigate if the PSCM wiring is the reason for the momentary loss of voltage. This test verifies the PSCM fuses, PSCM wiring harness power and ground connections are working correctly, as well as the battery and charging system.

scientia non olet · About LEMON Manuals