LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Transit Connect Titanium, Gas >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel And Console >> Removal And Installation >> In-Vehicle Crossbeam >> Installation

In-Vehicle Crossbeam: Installation

  1. To install, reverse the removal procedure.
  2. NOTE: Make sure that the tolerance absorbers turn without resistance.
    NOTE: In-vehicle cross beam shown in illustration without instrument panel for clarity.

    Turn on both sides the tolerance absorber to the stop and turn back a half turn.

    GFD574189Courtesy of FORD MOTOR COMPANY
  3. Check on both sides that the tolerance absorber contacts the A-pillar.
GFD574190Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals