LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Mustang Mach-E First Edition >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> General Procedures >> Factory Mode Deactivation

Factory Mode Deactivation

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Deactivation 

NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode  . Factory mode reduces battery drain during long periods when the vehicle is not used. While in factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center. If the vehicle is in factory mode, the system automatically reverts to Transport mode after 60 ignition cycles. If the IPC displays TRANSPORT MODE CONTACT DEALER  , refer to the Transport Mode Deactivation procedure in this service information.
  1. Place the ignition in the OFF position.
  2. Verify the battery is fully charged. Refer to: Battery Charging .
  3. NOTE: One IKT must  be in the vehicle.

    Cycle the Engine Start/Stop button 120 times.

  4. Refer to the Transport Mode Deactivation procedure in this service information. Refer to: Transport Mode Deactivation .
scientia non olet · About LEMON Manuals