Differential Fluid Level Check
WARNING: This page is about a different car, the 2021 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Check
- With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview
- Remove and discard the RDU fluid fill plug.
- If fluid level is low, check and top off the RDU with clean RDU fluid. The RDU fluid level should be within 2mm (0.079 in.) from the fluid level fill plug opening.
- If empty, fill the RDU with clean RDU fluid. Refer to: Specifications
-
NOTE: Make sure that a new component is installed.
Install the RDU fluid fill plug.
Torque: 21 lb.ft (29 Nm)