Front Brake Disc: Installation
NOTE:
Make sure that the mating faces are clean and free of foreign material.
- Clean the brake disc mating surfaces using a wire brush and the specified material.
Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B
-
NOTE: Make sure that the brake hose is not twisted when installing the brake caliper or damage to the brake flexible hose may occur.
To install, reverse the removal procedure.
- Deactivate the brake service mode. Refer to BRAKE SERVICE MODE ACTIVATION AND DEACTIVATION .
- Apply the brake pedal several times to verify correct brake system operation.