Normal Operation and Fault Conditions
WARNING: This page is about a different car, the 2020 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
When the ignition is set to ON, the ABS module and the BCM share VIN information through the GWM over the HS-CAN1 and HS-CAN2. If the ABS module has a different VIN than the BCM due to incorrect module configuration, this DTC sets.
PPT AF ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fautl Trigger Conditions |
|---|---|---|
| U3002-51 | Vehicle Identification Number: Not Programmed | Sets when the VIN message sent by the BCM, through the GWM and over the HS-CAN, contains 'null' or 'Vin_not_programmed' instead of the actual VIN. This indicates the VIN has not yet been programmed. |
| U3002:62 | Vehicle Identification Number: Signal Compare Failure | Sets when the VIN message sent by the BCM, through the GWM and over the HS-CAN, does not match the VIN stored in the ABS module. |