Pinpoint Tests: Notes

A Single Mirror Is Inoperative/Does Not Operate Correctly

Refer to Power Mirrors for schematic and connector information.

Normal Operation and Fault Conditions

Refer to: Rear View Mirrors - System Operation and Component Description .

Possible Causes

Wiring, terminals or connectors
Power window concern
Exterior mirror control switch (integral to the LH front window control switch)
Exterior mirror motor
Exterior mirror

Visual Inspection and Diagnostic Pre-Checks

Inspect the suspect exterior mirror for damage or obstructions.

NOTE: Clean the entire mirror assembly and glass to assist in verification of the customer concern and/or impact damage. Do not clean any mirror glass or housing with an ice scraper, razor blade, abrasive pad, harsh chemicals or petroleum based cleaning products, as these may damage the mirror glass and/or housing.