Connecting Rod Bearing Journal Clearance
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING INFORMATION
Check
NOTE:
Refer to the appropriate Engine System articlefor the specification.
-
NOTE: The crankshaft connecting rod journals must be within specifications to check the connecting rod bearing journal clearance.
Remove the connecting rod bearing cap and connecting rod bearing.
- Position a piece of Plastigage across the bearing surface.
-
NOTE: Do not turn the crankshaft during this step.
Install and tighten to specifications, then remove the connecting rod bearing cap.
- Measure the Plastigage to get the connecting rod bearing journal clearance. The Plastigage should be smooth and flat. A changing width indicates a tapered or damaged connecting rod or connecting rod bearing.