LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 377 (Perimeter Anti-Theft Alarm) >> Removal And Installation >> Intrusion Sensor >> Installation

Intrusion Sensor: Installation

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Using a diagnostic scan tool, carry out the LIN New Module Initialization procedure (Toolbox>Electrical>Service Functions>LIN New Module Initialization).

  3. NOTE: This step is only necessary when installing a new component.

    Carry out the BCM self-test. Clear the Diagnostic Trouble Codes (DTCs) and then retrieve the Diagnostic Trouble Codes (DTCs) from the BCM to confirm all Diagnostic Trouble Codes (DTCs) have been cleared.

scientia non olet · About LEMON Manuals