LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Closures >> Removal And Installation >> Rear Gate Trunk Module (RGTM) >> Installation

Rear Gate Trunk Module (RGTM): Installation

  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Using a diagnostic scan tool, complete the PMI process for the RGTM following the on-screen instructions.

  3. If equipped. Carry-out the power liftgate initialization. Refer to: Power Liftgate Initialization 

scientia non olet · About LEMON Manuals