LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls - 2.0L ECOBOOST (184KW/250PS) - Mi4 >> Description And Operation >> Electronic Engine Controls - System Operation and Component Description >> Component Description >> Camshaft Position (CMP) Sensor

Camshaft Position (CMP) Sensor

The CMP sensor detects the position of the camshaft. The CMP sensor identifies when piston number 1 is on its compression stroke. A signal is then sent to the PCM and used for synchronizing the sequential firing of the fuel injectors. Coil on plug (COP) ignition applications use the CMP sensor signal to select the correct ignition coil to fire.

Inline engines with 2 camshaft and VCT are equipped with 2 CMP sensors. The second sensor identifies the exhaust camshaft position.

The 2 sensor system on inline engines use the following CMP sensor signal circuit names:

scientia non olet · About LEMON Manuals