Section 16 (Four-Wheel Drive Systems)
WARNING: This page is about a different variant/trim than selected.
- Description And Operation
- Diagnosis And Testing
- Four-Wheel Drive Systems
- Diagnostic Trouble Code (DTC) Chart
- Global Customer Symptom Code (GCSC) Chart
- Symptom Chart
- Symptom Chart -- NVH
- Pinpoint Tests
- Pinpoint Test A : AWD Module Power, Ground, Or Internal Fault
- Pinpoint Test B : Transfer Case Clutch Actuator
- Pinpoint Test C : C00A6:4B
- Pinpoint Test D : C00A6:54
- Pinpoint Test E : C00A6:66
- Pinpoint Test F : C00A7:11, C00A7:13, C00A7:17
- Pinpoint Test G : C00A8:11, C00A8:13, C00A8:17
- Pinpoint Test H : Module Configuration Faults
- Pinpoint Test I : P1001, P1397, P1501, P1705
- Pinpoint Test J : P166E:00
- Pinpoint Test K : Lost Communication With Another Module
- Pinpoint Test L : Invalid Data Received From Another Module
- Pinpoint Test M : Incorrect Torque Transferred To Front Axle After Installing Transfer Case
- Pinpoint Test N : The Transfer Case Does Not Transfer Torque Correctly
- Pinpoint Test O : The Transfer Case Does Not Transfer Torque Correctly
- Pinpoint Test P : Fluid Leak From Transfer Case
- Pinpoint Test Q : Front Axle Binding On Sharp Turns On Dry Pavement
- Pinpoint Test R : 4WD Temporarily Locked Message Displayed
- Pinpoint Test S : 4WD Temporarily Locked Message Displayed
- Pinpoint Test T : Clicking/Whirring Noise From Transfer Case At Start Up
- Pinpoint Test U : The Transfer Case Makes Noise
- Four-Wheel Drive Systems
- General Procedures
- Removal And Installation