LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Explorer ST >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Rear Drive Axle/Differential) >> Removal And Installation >> Axle Assembly >> Installation

Axle Assembly: Installation

WARNING: This page is about a different car, the 2019 Ford Police Interceptor Utility and 2019 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: If replacing the axle assembly, the 4X4 control module will need to be reconfigured with the new Active Torque Coupling (ATC) bar code information. If the new bar code information does not match the existing 4X4 control module information, driveline damage or driveability concerns can occur.

    If installing a new RDU, re-configure the Active Torque Coupling (ATC). Refer to: Active Torque Coupling Configuration .

  2. To install, reverse the removal procedure.
  3. Check the differential fluid level. Refer to: Differential Fluid Level Check .
scientia non olet · About LEMON Manuals