Normal Operation and Fault Conditions
When the ignition is set to ON, the ABS module and the BCM share VIN information through the GWM over the HS-CAN1 and HS-CAN2. If the ABS module has a different VIN than the BCM due to incorrect module configuration, this DTC sets.
PPT AF ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fautl Trigger Conditions |
|---|---|---|
| U3002:62 | Vehicle Identification Number: Signal Compare Failure | Sets when the VIN message sent by the BCM, through the GWM and over the HS-CAN, does not match the VIN stored in the ABS module. |