LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Edge Titanium, 4WD >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Campaigns >> Other Variant >> Collision/Avoidance >> Customer Satisfaction Program 20B39 - Front View And Center High Mount Stop Lamp Camera Improper Function (20B39)

Customer Satisfaction Program 20B39 - Front View And Center High Mount Stop Lamp Camera Improper Function (20B39)

WARNING: This page is about the Edge SE, 4WD, which is a different variant/trim than selected.
Publication date: 2020-11-06
Reference number: 20B39

CUSTOMER SATISFACTION PROGRAM 20B39 - FRONT VIEW AND CENTER HIGH MOUNT STOP LAMP CAMERA IMPROPER FUNCTION

CUSTOMER SATISFACTION PROGRAM 20B39 - FRONT VIEW AND CENTER HIGH MOUNT STOP LAMP CAMERA IMPROPER FUNCTION

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 20B39, Date of Issue:  November 6, 2020
FORD: 2020 Edge, Expedition, F-150, F-Super Duty, Transit
LINCOLN: 2020 Nautilus

CUSTOMER SATISFACTION PROGRAM 20B39

SUBJECT

Customer Satisfaction Program 20B39 

Certain 2020 Model Year Multiple Vehicle Lines

Front View and Center High Mount Stop Lamp Camera Improper Function

PROGRAM TERMS

This program will be in effect through November 30, 2030 or a maximum of 150,000 miles, whichever occurs first. If a vehicle already has accumulated more than 150,000 miles, this coverage will last through May 31, 2021.

AFFECTED VEHICLES

NOTE: Only analog cameras are affected by this program.
AFFECTED VEHICLES

Vehicle Model Year Assembly Plant Build Dates
F-150 2020 Dearborn October 26, 2019 through May 18, 2020
Kansas City November 2, 2019 through May 18, 2020
Transit Kansas City March 3, 2020 through March 11, 2020
F-Super Duty Kentucky Truck November 3, 2019 through May 18, 2020
Expedition Kentucky Truck October 30, 2019 through June 22, 2020
Edge Oakville November 13, 2019 through May 26, 2020
Nautilus Oakville November 21, 2019 through May 26, 2020

Affected vehicles are identified in OASIS and FSA VIN Lists.

REASON FOR THIS PROGRAM

In some of the affected vehicles, insufficient electrical conductivity within the Printed Circuit Board (PCB) internal to the camera may lead to intermittent front view or Center High Mount Stop Lamp (CHMSL) camera operation. This could result in a blank or distorted image from the front of the vehicle or of the truck bed.

SERVICE ACTION

Dealers are to replace the front view camera or the CHMSL camera following the dealer bulletin technical information. This service must be performed on all affected vehicles at no charge to the vehicle owner.

OWNER NOTIFICATION MAILING SCHEDULE

Owner letters are expected to be mailed the week of November 9, 2020. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.

ATTACHMENTS

  1. Attachment I: Administrative Information
  2. Attachment II: Labor Allowances and Parts Ordering Information
  3. Attachment III: Technical Information
  4. Owner Notification Letters

QUESTIONS & ASSISTANCE

For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.

Sincerely,

G13345242

David J. Johnson

ATTACHMENT I

Customer Satisfaction Program 20B39 

Certain 2020 Model Year Multiple Vehicle Lines Front View and Center High Mount Stop Lamp Camera Improper Function

OASIS ACTIVATION

OASIS will be activated on November 6, 2020.

FSA VIN LISTS ACTIVATION

FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com  on November 6, 2020. Owner names and addresses will be available by November 24, 2020.

NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle registration records. The use of such motor vehicle registration data for any purpose other than in connection with this program is a violation of law in several states, provinces, and countries. Accordingly, you must limit the use of this listing to the follow-up necessary to complete this service action.

SOLD VEHICLES

  • Owners of affected vehicles will be directed to dealers for repairs.
  • Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
  • Correct other affected vehicles identified in OASIS which are brought to your dealership.
  • Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.

STOCK VEHICLES

  • Correct all affected units in your new vehicle inventory before delivery.
  • Use OASIS to identify any affected vehicles in your used vehicle inventory.

TITLE BRANDED/SALVAGED VEHICLES

Affected title branded and salvaged vehicles are eligible for this service action.

OWNER REFUNDS

Refunds are not approved for this program.

RENTAL VEHICLES

Rental vehicles are not approved for this program.

LINCOLN PICKUP AND DELIVERY

Owners of 2017 MY and newer Lincoln vehicles have the option of requesting pickup and delivery service with a Lincoln loaner (up to 2 days), from their dealership. For details, reference EFC07715, 2020 Lincoln Pickup & Delivery Updates.

ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)

Additional repairs identified as necessary to complete the FSA should be managed as follows:

  • For related damage and access time requirements, refer to the Warranty and Policy Manual/Section 6 - Ford & Lincoln Program Policies/General Information & Special Circumstances for FSA's/Related Damage.
  • For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is required, although related damage must be on a separate repair line with the "Related Damage" radio button checked.
    • Ford vehicles - 3 years or 36,000 miles
    • Lincoln vehicles - 4 years or 50,000 miles
  • For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval Request to the SSSC Web Contact Site prior to completing the repair.

CLAIMS PREPARATION AND SUBMISSION

  • Claim Entry:  Enter claims using Dealer Management System (DMS) or One Warranty Solution (OWS) online.
    • When entering claims, select claim type 31: Field Service Action. The FSA number 20B39 is the sub code.
    • For additional claims preparation and submission information, refer to the Recall and Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
  • Related Damage/Additional labor and/or parts:  Must be claimed as Related Damage on a separate repair line from the FSA with same claim type and sub code as described in Claim Entry above.
    IMPORTANT: Click the Related Damage Indicator radio button.
  • Lincoln Pickup & Delivery:  Claims for Lincoln Pickup & Delivery with a Lincoln loaner (up to 2 days) should be submitted on a separate line from the FSA. Refer to EFC07715, 2020 Lincoln Pickup & Delivery Updates for details.

ATTACHMENT II

Customer Satisfaction Program 20B39 

Certain 2020 Model Year Multiple Vehicle Lines Front View and Center High Mount Stop Lamp Camera Improper Function

LABOR ALLOWANCES

LABOR ALLOWANCES

Description Vehicle Labor Operation Labor Time
Replace Analog Front View Camera (includes time for camera configuration) F-150 20B39B 1.1 Hours
Raptor 20B39C 0.8 Hours
Transit 20B39D 1.1 Hours
Expedition 20B39E 1.5 Hours
Edge 20B39F 1.5 Hours
Nautilus 20B39G 1.5 Hours
Replace CHMSL Analog Camera - if equipped (includes time for camera configuration) F-Super Duty 20B39H 0.4 Hours
360 Degree View Camera Alignment or Pro Trailer Backup Assist (PTBA) Camera Alignment (as needed) F-150/Raptor, Expedition, Nautilus 20B39J 0.5 Hours

PARTS REQUIREMENTS/ORDERING INFORMATION

PARTS INFORMATION

Part Number Description Order Quantity Claim Quantity
JL3Z-19G490-F F-150 Raptor - Front View Camera 1 1
JL3Z-19G490-E F-150 - Front View Camera 1 1
LK4Z-19G490-H Transit - Front View Camera 1 1
JL1Z-19G490-B Expedition - Front View Camera 1 1
K2GZ-19G490-C Edge - Front View Camera 1 1
K2GZ-19G490-A Nautilus - Front View Camera 1 1
HC3Z-19G490-Z F-Super Duty - CHMSL Camera (if equipped) 1 1

Order your parts through normal order processing channels. To guarantee the shortest delivery time, an emergency order for parts must be placed.

DEALER PRICE

For latest prices, refer to DOES II.

PARTS RETENTION, RETURN, & SCRAPPING

Follow the provisions of the Warranty and Policy Manual, Section 1 - WARRANTY PARTS RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must be scrapped in accordance with all applicable local, state and federal environmental protection and hazardous material regulations. Federal law prohibits selling motor vehicle parts or components that are under safety, compliance, or emissions recall.

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.

ATTACHMENT III

CERTAIN 2020 MODEL YEAR MULTIPLE VEHICLE LINES - FRONT VIEW AND CENTER HIGH MOUNTED STOP LAMP CAMERA IMPROPER FUNCTION 

SERVICE PROCEDURE

NOTE: Only analog cameras  are affected by this program.
NOTE: Some cameras may have a rubber grommet or a spacer on them. If the replacement camera does not have the rubber grommet or spacer installed, transfer the original camera rubber grommet or spacer to the new  camera before installation.
NOTE: If equipped, transfer the washer nozzle and tube assembly to the new camera. See Figure 1.
G13345243
All Except F-Super Duty Vehicles
  1. Replace the Front Parking Aid Camera. Please follow the Workshop Manual (WSM) procedures in Section 413-13.
F-Super Duty Vehicles Only
  1. Replace the Center High Mounted Stop Lamp (CHMSL) camera. Please follow the Workshop Manual (WSM) procedures in Section 413-13.
  2. Transfer the original CHMSL camera rubber grommet to the new  CHMSL camera. See Figure 2.
    G13345244