LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Edge ST >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Instrument Panel And Console) >> Removal And Installation >> Overhead Console >> Installation

Overhead Console: Installation

WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component equipped with an intrusion sensor.

    Using a diagnostic scan tool, carry out the LIN New Module Initialization procedure (Toolbox>Electrical>Service Functions>LIN New Module Initialization).

  3. NOTE: This step is only necessary when installing a new component equipped with an intrusion sensor.

    Carry out the BCM self-test. Clear the Diagnostic Trouble Codes (DTCs) and then retrieve the Diagnostic Trouble Codes (DTCs) from the BCM to confirm all Diagnostic Trouble Codes (DTCs) have been cleared.

scientia non olet · About LEMON Manuals