Pinpoint Tests Z: Keep Alive Power (KAPWR): Introduction

NOTE: Regeneration may occur during normal operation. During regeneration, diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures, allow the process to complete before continuing diagnostics.

This pinpoint test is intended to diagnose the following:

battery cables loose or intermittent connections
harness circuit: KAPWR
PCM (12A650)

Fig 1: Powertrain Control Module-B (PCM-B) Connector

Courtesy of FORD MOTOR CO.

Harness Side

Circuit	Pin
KAPWR (Keep Alive Memory Power)	62