LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2019 >> F-150 Limited, RWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Full Frame And Body Mounting >> Removal And Installation >> Body >> Installation

Removal And Installation: Body: Installation

  1. NOTE: Prior to lowering the body onto the chassis, verify that the steering shaft, hoses and wire harnesses are clear of obstruction and have been positioned aside to prevent damage.

    To install, reverse the removal procedure.

    • Align the tires to the marks on the floor.

    • With aide of an assistant in aligning the body-to-chassis, lower the body on the chassis.

    • Install new body mount bolts for all discarded.

  2. Reverse removal procedure steps to complete installation.
  3. Check and fill the transmission fluid. For 6R80, Refer to: Transmission Fluid Level Check . For 10R80, Refer to: Transmission Fluid Level Check .
  4. Refill the cooling system. For 2.7L, Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding . For 3.3L, Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding . For 3.5L, Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding . For 5.0L, Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
  5. Recover the A/C refrigerant. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - Vehicles With: R1234YF Refrigerant .
scientia non olet · About LEMON Manuals