| Accelerator pedal position |
PCM |
This message informs the ABS module of the current position of the accelerator pedal, 0-100%. |
| Brake on-off switch |
PCM |
This message informs the ABS module the driver has pressed the brake pedal. |
| Driven wheel propulsion torque |
PCM |
This message provides the ABS module of the current amount of propelling torque being applied to the driven wheels by the engine. |
| Driver door ajar status |
BCM |
This message informs the ABS module the driver door status, closed or open. |
| Driver seat belt buckle status |
RCM |
This message informs the ABS module of the current status of the driver seat belt buckle; buckled, unbuckled, faulty or unknown. |
| Engine off time |
PCM |
This message informs the ABS module how long, in seconds, the engine has been off. |
| Engine RPM |
PCM |
This message informs the ABS module of the current engine RPM. |
| Gear lever position |
TCM |
This message informs the ABS module of the current gear selector lever position. |
| Ignition status |
BCM |
This message informs the ABS module of the current ignition status; off, accessory, run, start, invalid or unknown. |
| Key in ignition status |
BCM |
This message informs the ABS module of the current ignition key status; in or out. |
| Longitudinal acceleration |
RCM |
The ABS module uses this message to confirm forward or rearward vehicle movement. |
| Transmission in REVERSE |
PCM |
This message informs the ABS module of the current reverse gear status; inactive or active. |
| Vehicle configuration data |
BCM |
This message provides the ABS module with the current optional and configured items such as tire size, axle ratio, keyless entry and VIN. |