Engine Mount: Removal
WARNING: This page is about a different variant/trim than selected.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking And Lifting .
- If equipped, release the 4 retainers and remove the underbody shield.
- If equipped, remove the 10 retainers and the skid plate.
-
NOTE: Failure to position the wood block and floor jack as illustrated can result in damage to the oil pan.
Position a floor jack with a block of wood under the front of the oil pan.
- Detach the A/C line retainer from the shock tower bracket.
- Using hose clamp pliers, pinch the lower degas bottle hose and remove the hose from the coolant inlet pipe.
- Remove the degas bottle. For additional information, refer to Engine Cooling .
- Remove the 4 engine mount nuts.
- Remove the 3 bolts and the engine mount.