Cylinder Head: Disassembly

WARNING: This page is about a different variant/trim than selected.

All cylinder heads

NOTE: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their original locations.

Using the Valve Spring Compressors, remove the keys, retainer and spring.

Courtesy of FORD MOTOR COMPANY
Remove and discard the valve stem seal.

Courtesy of FORD MOTOR COMPANY
Remove the valve from the cylinder head.

Courtesy of FORD MOTOR COMPANY
Repeat the above steps for each valve.
Remove the timing chain guide pin.

Courtesy of FORD MOTOR COMPANY

RH cylinder head
Remove the timing chain tensioner arm pin.

Courtesy of FORD MOTOR COMPANY
Remove and discard the Cylinder Head Temperature(CHT) sensor.

Courtesy of FORD MOTOR COMPANY