LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus SHO >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.5L GTDI >> In-Vehicle Repair >> Flexplate >> Installation

In-Vehicle Repair: Flexplate: Installation

  1. NOTE: One of the 8 flexplate holes are offset so the flexplate can only be installed in one position.

    Install the flexplate and the 8 bolts.

    • Tighten in the sequence shown to 80 Nm (59 lb-ft).

    Fig 1: Flexplate Tightening Sequence
    GFD338490Courtesy of FORD MOTOR COMPANY
  2. Install the transaxle. For additional information, refer to Transaxle - 3.5L GTDI .
  3. Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.
scientia non olet · About LEMON Manuals