LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Taurus SHO >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.5L GTDI >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Disassembly

Cylinder Head: Disassembly

NOTE: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their original locations.
  1. Using the Valve Spring Compressors, remove the keys, retainer and spring.
    GFD338963Courtesy of FORD MOTOR COMPANY
  2. Remove the valve from the cylinder head.
  3. Remove and discard the valve stem seal.
  4. Repeat the above steps for each valve.
  5. Remove the timing chain guide pin and/or timing chain tensioner arm pin.
  6. Remove the turbocharger oil supply quick connect fitting.

    • Inspect and if necessary, replace the quick connect fitting.

  7. If equipped, remove and discard the Cylinder Head Temperature(CHT) sensor.
scientia non olet · About LEMON Manuals