LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fusion S >> Repair and Diagnosis (Single Page) >> Steering >> Manual Steering >> Electronic Power Assist Steering Component Testing - Fusion (Except Hybrid) >> DTC Symptom Selection >> PSCM - Power Steering Control Module DTC Index >> DTC C200B: Steering Shaft Torque Sensor 1 >> Diagnostic Aids

Diagnostic Aids

When this DTC is set the PSCM removes steering assist, enters into manual mode and transmits an invalid steering angle message over the HS-CAN. The module also sends a message to the IPC to display STEERING LOSS STOP SAFELY in the message center.