LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Flex SE >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Diagnosis And Testing >> Charging System >> Pinpoint Tests >> DTC Fault Trigger Conditions

DTC Fault Trigger Conditions

DTC Description Fault Trigger Conditions
P0563 System Voltage High If the module detects a voltage from the charging system higher than 15.2 volts, this DTC sets. This DTC does not set in the PCM unless the vehicle speed is above 8 km/h (5 mph).
P1397 System Voltage Out of Self-Test Range If the voltage rises above or drops below the calibrated set point, the PCM sets this DTC. This DTC may also be set if the vehicle has been recently jump started or has had a discharged battery.
U3003:17 Battery Voltage: Circuit Voltage Above Threshold Sets in the BCM when the BCM detects that battery voltage has gone above 15.9 volts from the voltage supply circuit.