LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fiesta ST >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass, Frames And Mechanisms >> Removal And Installation >> Front Door Window Control Switch >> Installation

Front Door Window Control Switch: Installation

  1. To install, reverse the removal procedure.

    Vehicles With: One-Touch Up and Down Driver Window 

  2. NOTE: The master window control switch and the LH window motor must be initialized whenever battery voltage has been removed from the driver window control switch for greater than 3 minutes (for example, the battery or the master window switch is disconnected) or if a new driver window control switch is installed.

    If the door is equipped with one touch up/down, carry out the power door window initialization. Refer to: Power Door Window Initialization - Vehicles With: One-Touch Open and Close Driver Window/One-Touch Open and Close Front Windows .

scientia non olet · About LEMON Manuals