Driver Seat Track: Installation
WARNING: This page is about a different car, the 2016 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
To install, reverse the removal procedure.
- 2.
Using rubber mallet, install the recliner handle knob. Use the General Equipment: Rubber Mallet
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Using rubber mallet, install the retaining clip. Use the General Equipment: Punch Use the General Equipment: Rubber Mallet
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Using rubber mallet, install the lumbar handle knob cap. Use the General Equipment: Rubber Mallet
 Courtesy of FORD MOTOR COMPANY
|