Hydraulic Control Unit (HCU): Installation
WARNING: This page is about a different car, the 2016 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Install the HCU and the 3 HCU bracket bolts.Torque: 89 lb.in (10 Nm)
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Bleed the brake system. Refer to: Brake System Pressure Bleeding
.
- 3.
If a new HCU/ ABS module was installed, using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.