Disassembly And Assembly Of Subassemblies: Piston: Disassembly

NOTE: If the piston and connecting rod are to be reinstalled, they must be assembled in the same orientation. Mark the piston orientation to the connecting rod reassembly.

• 1.
  
  Remove and discard the piston rings.

Courtesy of FORD MOTOR COMPANY

• 2.
  
  Remove and discard the 2 piston pin retainers.
  • Remove the piston pin.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Separate the piston from the connecting rod.
  • Clean and inspect the piston and connecting rod. For additional information, refer to Engine System General Information .

Courtesy of FORD MOTOR COMPANY