Disassembly And Assembly Of Subassemblies: Piston: Disassembly

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If the piston and connecting rod are to be reinstalled, they must be assembled in the same orientation. Mark the piston orientation to the connecting rod reassembly.

1.

Remove and discard the piston rings.

Courtesy of FORD MOTOR COMPANY

2.

Remove and discard the 2 piston pin retainers.
- Remove the piston pin.

Courtesy of FORD MOTOR COMPANY

3.

Separate the piston from the connecting rod.
- Clean and inspect the piston and connecting rod. For additional information, refer to Engine System General Information .

Courtesy of FORD MOTOR COMPANY