LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Fusion S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Collision Warning System And Collision Avoidance System (Except Hybrid) >> Description And Operation >> Collision Warning and Collision Avoidance System - System Operation and Component Description >> System Operation >> Network Message Chart

Network Message Chart

Network Input Messages - ACM 

Broadcast Message Originating Module Message Purpose
Instrument panel cluster chime request IPC Data used to command a warning chime during a possible collision event and audio mute so that the warning chime can be heard.

Network Input Messages - CCM 

Broadcast Message Originating Module Message Purpose
Collision avoidance and driver support camera status IPMA Data used to communicate the function status of the camera in the IPMA.
HUD status HUD module Data used for HUD module active and available status.
HUD fault HUD module Data used for HUD module fault status.

Network Input Messages - HUD 

Broadcast Message Originating Module Message Purpose
HUD flash command CCM Flashes the HUD module LED array when commanded.
HUD flash rate CCM Flashes the HUD module LED array when commanded
Ignition status BCM Data used for ignition switch position input.

Network Input Messages - IPC 

Broadcast Message Originating Module Message Purpose
Collision avoidance and driver support camera status IPMA Data used to command the pre-collision assist system fault status in the message center.
Collision avoidance and driver support chime request CCM Data used to command a warning chime that a collision event is possible.
Collision avoidance and driver support radar blocked warning CCM Data used to command a radar blocked message in the message center.
Forward collision chime request CCM Data used to command warning chime during possible collision event. When this message is received, the IPC sends the audio mute message to the ACM.
Forward collision warning message request CCM Data used to command warning chime and messages during possible collision event.
HUD fault HUD module Data used to command the forward collision warning system fault status message in the message center.

Network Input Messages - IPMA 

Broadcast Message Originating Module Message Purpose
Collision avoidance and driver support radar status CCM Data used to communicate the function status of the radar in the CCM.

Network Input Messages - ABS module 

Broadcast Message Originating Module Message Purpose
Collision mitigation by braking deceleration request CCM Data used to enable the brakes to slow vehicle speed when the pre-collision assist system determines that a collision is imminent.
scientia non olet · About LEMON Manuals