Pinpoint Test S : The Power Point Is Inoperative/Always Powered: Notes
WARNING: This page is about a different variant/trim than selected.
Refer to Power Distribution for schematic and connector information.
Refer to Horn/Cigar Lighter for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Module Controlled Functions - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1430:12 | Power Point Relay Reset Output: Circuit Short To Battery | A continuous and on-demand DTC that sets when the BCM detects a short to voltage from the power point relay coil circuit. |
| B1430:14 | Power Point Relay Reset Output: Circuit Short To Ground or Open | A continuous and on-demand DTC that sets when the BCM detects a short to ground or open from the power point relay coil circuit. |
| B1435:12 | Power Point Relay Set Output: Circuit Short To Battery | A continuous and on-demand DTC that sets when the BCM detects a short to voltage from the power point relay coil circuit. |
| B1435:14 | Power Point Relay Set Output: Circuit Short To Ground or Open | A continuous and on-demand DTC that sets when the BCM detects a short to ground or open from the power point relay coil circuit. |
Possible Sources
- Wiring, terminals or connectors
- Power point
- BCM
- BJB