Fuel Pump Driver Module (FPDM): Installation

• 1.
  
  
  NOTE: Make sure that the mating surface is clean and free of foreign material.

  Clean the FPDM mounting surface.

Courtesy of FORD MOTOR COMPANY

• 2.
  
  Peel off the protective backing from the new FPDM.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Locate the FPDM over the 2 studs (for location purposes only) and press down firmly.

Courtesy of FORD MOTOR COMPANY

• 4.
  
  To install, reverse the removal procedure.